Laurel-Fingerboard-FrontLaurel-Fingerboard-Front

Laurel Fingerboard – Jumbo Frets – Mighty Mite Strat – 10.0mm

$151.90

MM2937-LA

SKU: MM2937-LA Categories: , , ,

PRODUCT OVERVIEW

Picture of neck currently not available. Picture shown is of Laurel fingerboard material only.

Neck & Tuners

Strat® style replacement neck features a laurel fingerboard fitted with 22 jumbo frets. If installing vintage tuners; you may be required to install 10 mm adapter bushings. Mighty Mite does not supply these bushings.

Wood Variations & Assembly

This Strat® style neck is made in Indonesia with quality tone woods. Due to the nature of wood, no two necks are the same and may differ from what is pictured. Never force the neck into the pocket; it should just drop into the neck pocket or be a little snug. Remember that the finish of the neck and body will make the neck pocket smaller.
More specifications are listed below.

SPECIFICATIONS

WOODS & MATERIALS

Fretboard Material

Laurel

Skunk Stripe

Laurel

Neck Material

Maple

Finish

Satin, Thin Polyurethane Oil Based

SIZE & SHAPE

Neck Profile Shape

C Shape

Radius

9.5 Straight

Orientation

Right-hand

Heel Size

approximately: 2 11/64″ wide by 3″ high and 3/4″ deep

Scale Length

25 1/2″

Nut Width

42mm installed nut

Nut Material

PPS-Flat Bottom

FRETS & MORE

Number of Frets

22

Side Dots

White

Fret Size

Jumbo – 2.9 mm — Nickel

Truss Rod

Single-adjust at headstock – 4mm wrench not included

Inlays

Pearloid Dots

Tuner Hole Size

10mm 6-in-line Modern Tuners

C SHAPE NECK PROFILE

DETAILS SHIPPING

MM2975-LA has no Cites issues as of April 2018.
Shipping Package Weight: 3 lbs

Shipping Package Dimensions: 36 in x 6 in x 6 in

LIMITED WARRANTY

CONDITIONS OF USE

Pricing and Specifications are subject to change without notice.

California Prop 65 Warning: This product contains a chemical(s) know to the state of California to cause cancer or birth defects or other reproductive harm.

Description

PRODUCT OVERVIEW

Picture of neck currently not available. Picture shown is of Laurel fingerboard material only.

Neck & Tuners

Strat® style replacement neck features a laurel fingerboard fitted with 22 jumbo frets. If installing vintage tuners; you may be required to install 10 mm adapter bushings. Mighty Mite does not supply these bushings.

Wood Variations & Assembly

This Strat® style neck is made in Indonesia with quality tone woods. Due to the nature of wood, no two necks are the same and may differ from what is pictured. Never force the neck into the pocket; it should just drop into the neck pocket or be a little snug. Remember that the finish of the neck and body will make the neck pocket smaller.
More specifications are listed below.

SPECIFICATIONS

WOODS & MATERIALS

Fretboard Material

Laurel

Skunk Stripe

Laurel

Neck Material

Maple

Finish

Satin, Thin Polyurethane Oil Based

SIZE & SHAPE

Neck Profile Shape

C Shape

Radius

9.5 Straight

Orientation

Right-hand

Heel Size

approximately: 2 11/64″ wide by 3″ high and 3/4″ deep

Scale Length

25 1/2″

Nut Width

42mm installed nut

Nut Material

PPS-Flat Bottom

FRETS & MORE

Number of Frets

22

Side Dots

White

Fret Size

Jumbo – 2.9 mm — Nickel

Truss Rod

Single-adjust at headstock – 4mm wrench not included

Inlays

Pearloid Dots

Tuner Hole Size

10mm 6-in-line Modern Tuners

C SHAPE NECK PROFILE

DETAILS SHIPPING

MM2975-LA has no Cites issues as of April 2018.
Shipping Package Weight: 3 lbs

Shipping Package Dimensions: 36 in x 6 in x 6 in

LIMITED WARRANTY

CONDITIONS OF USE

Pricing and Specifications are subject to change without notice.

California Prop 65 Warning: This product contains a chemical(s) know to the state of California to cause cancer or birth defects or other reproductive harm.

Additional information

Weight3.0 kg
Dimensions36 × 6 × 6 cm

Reviews

There are no reviews yet.

Be the first to review “Laurel Fingerboard – Jumbo Frets – Mighty Mite Strat – 10.0mm”

Your email address will not be published. Required fields are marked *