Description
PRODUCT OVERVIEW
Neck & Tuners
Strat® style replacement neck features a compound radius, maple fingerboard fitted with 22 medium frets. If installing vintage tuners; you may be required to install 10 mm adapter bushings. Mighty Mite does not supply these bushings.
Wood Variations & Assembly
This Strat® style neck is made in Indonesia with quality tone woods. Due to the nature of wood, no two necks are the same and may differ from what is pictured. Never force the neck into the pocket; it should just drop into the neck pocket or be a little snug. Remember that the finish of the neck and body will make the neck pocket smaller.
More specifications are listed below.
Note: Carefully read the shipping information, conditions of use, warranty, return policy and conditions of sale before purchasing.
SPECIFICATIONS
WOODS & MATERIALS
Fretboard Material
Maple
Skunk Stripe
Merbau stripe
Neck Material
Maple
Finish
Satin, Thin Polyurethane Oil Based
SIZE & SHAPE
Neck Profile Shape
C Shape
Radius
9.5 at nut, 12″ compound at 22nd fret
Orientation
Right-hand
Heel Size
approximately: 2 11/64″ wide by 3″ high and 3/4″ deep
Scale Length
25 1/2″
Nut Width
42mm installed nut
Nut Material
PPS-Flat Bottom
FRETS & MORE
Number of Frets
22
Side Dots
Black
Fret Size
Medium – 2.4mm – Nickel
Truss Rod
Single-adjust at headstock – 4mm wrench not included
Inlays
Black Dots
Tuner Hole Size
10mm 6-in-line Modern Tuners
C SHAPE NECK PROFILE
DETAILS SHIPPING
MM2902CR-M has no Cites issues as of April 2018.
Shipping Package Weight: 3 lbs
Shipping Package Dimensions: 36 in x 6 in x 6 in
LIMITED WARRANTY
Mighty Mite® is not affiliated with Fender® and no Fender® warranty applies.
To validate the limited warranty, the original purchaser must complete a Product Registration Form and send within 10 days following the original date of receiving your neck. The warranty is not transferable.
For more information regarding the limited warranty, return and exchange policies go to www.MightyMite.com Resources/Warranty.
CONDITIONS OF USE
This replacement neck is for Fender® or Squier® by Fender® guitar only. This neck is licensed as a replacement neck and may not be used to assemble Non-Fender® Guitars. This neck is licensed to Mighty Mite® by Fender® Musical Instruments under a quality control trademark license.
Pricing and Specifications are subject to change without notice.
California Prop 65 Warning: This product contains a chemical(s) know to the state of California to cause cancer or birth defects or other reproductive harm.
Reviews
There are no reviews yet.