R3 locking nut shelf - Compound 12-16" Radius - Rosewood fingerboard - Mighty Mite Strat NeckR3 locking nut shelf - Compound 12-16" Radius - Rosewood fingerboard - Mighty Mite Strat Neck

R3 Locking Nut – Compound Rosewood Fingerboard – Jumbo Frets – Mighty Mite Strat Neck – 10.5

$177.80

MM2940R3-R5

SKU: MM2940R3-R5 Categories: , , , , , ,

PRODUCT OVERVIEW

Neck & Tuners

Strat® style replacement neck features R3 (1-11/16″) Locking nut shelf, 12 to 14″ compound radius, rosewood fingerboard, 22 jumbo frets. Locking nut is not included.

If installing vintage tuners; you may be required to install 10.5 mm adapter bushings. Mighty Mite does not supply these bushings.

Wood Variations & Assembly

This Strat® style neck is made in Indonesia with quality tone woods. Due to the nature of wood, no two necks are the same and may differ from what is pictured. Never force the neck into the pocket; it should just drop into the neck pocket or be a little snug. Remember that the finish of the neck and body will make the neck pocket smaller.
More specifications are listed below.
Note: Carefully read the shipping information, conditions of use, warranty, return policy and conditions of sale before purchasing.

SPECIFICATIONS

WOODS & MATERIALS

Fretboard Material

Rosewood

Skunk Stripe

Rosewood stripe

Neck Material

Maple

Finish

Satin, Thin Polyurethane Oil Based

SIZE & SHAPE

Neck Profile Shape

C Shape

Radius

12″ at nut, 14″ compound at 22nd fret

Orientation

Right-hand

Heel Size

approximately: 2 3/16″ wide by 3″ high and 3/4″ de3

Scale Length

25 1/2″

FRETS & MORE

Number of Frets

22

Side Dots

White

Fret Size

Jumbo – 2.9mm – Nickel

Truss Rod

Single-adjust at headstock – 4mm wrench not included

Inlays

Pearloid Dots

Tuner Hole Size

10.5mm 6-in-line Modern Tuners

C SHAPE NECK PROFILE

DETAILS SHIPPING

Shipping Package Weight: 3 lbs

Shipping Package Dimensions: 36 in x 6 in x 6 in

LIMITED WARRANTY

Mighty Mite® is not affiliated with Fender® and no Fender® warranty applies.

To validate the limited warranty, the original purchaser must complete a Product Registration Form and send within 10 days following the original date of receiving your neck. The warranty is not transferable.

For more information regarding the limited warranty, return and exchange policies go to www.MightyMite.com Resources/Warranty.

CONDITIONS OF USE

This replacement neck is for Fender® or Squier® by Fender® guitar only. This neck is licensed as a replacement neck and may not be used to assemble Non-Fender® Guitars. This neck is licensed to Mighty Mite® by Fender® Musical Instruments under a quality control trademark license.

Pricing and Specifications are subject to change without notice.

California Prop 65 Warning: This product contains a chemical(s) know to the state of California to cause cancer or birth defects or other reproductive harm.

Description

PRODUCT OVERVIEW

Neck & Tuners

Strat® style replacement neck features R3 (1-11/16″) Locking nut shelf, 12 to 14″ compound radius, rosewood fingerboard, 22 jumbo frets. Locking nut is not included.

If installing vintage tuners; you may be required to install 10.5 mm adapter bushings. Mighty Mite does not supply these bushings.

Wood Variations & Assembly

This Strat® style neck is made in Indonesia with quality tone woods. Due to the nature of wood, no two necks are the same and may differ from what is pictured. Never force the neck into the pocket; it should just drop into the neck pocket or be a little snug. Remember that the finish of the neck and body will make the neck pocket smaller.
More specifications are listed below.
Note: Carefully read the shipping information, conditions of use, warranty, return policy and conditions of sale before purchasing.

SPECIFICATIONS

WOODS & MATERIALS

Fretboard Material

Rosewood

Skunk Stripe

Rosewood stripe

Neck Material

Maple

Finish

Satin, Thin Polyurethane Oil Based

SIZE & SHAPE

Neck Profile Shape

C Shape

Radius

12″ at nut, 14″ compound at 22nd fret

Orientation

Right-hand

Heel Size

approximately: 2 3/16″ wide by 3″ high and 3/4″ de3

Scale Length

25 1/2″

FRETS & MORE

Number of Frets

22

Side Dots

White

Fret Size

Jumbo – 2.9mm – Nickel

Truss Rod

Single-adjust at headstock – 4mm wrench not included

Inlays

Pearloid Dots

Tuner Hole Size

10.5mm 6-in-line Modern Tuners

C SHAPE NECK PROFILE

DETAILS SHIPPING

Shipping Package Weight: 3 lbs

Shipping Package Dimensions: 36 in x 6 in x 6 in

LIMITED WARRANTY

Mighty Mite® is not affiliated with Fender® and no Fender® warranty applies.

To validate the limited warranty, the original purchaser must complete a Product Registration Form and send within 10 days following the original date of receiving your neck. The warranty is not transferable.

For more information regarding the limited warranty, return and exchange policies go to www.MightyMite.com Resources/Warranty.

CONDITIONS OF USE

This replacement neck is for Fender® or Squier® by Fender® guitar only. This neck is licensed as a replacement neck and may not be used to assemble Non-Fender® Guitars. This neck is licensed to Mighty Mite® by Fender® Musical Instruments under a quality control trademark license.

Pricing and Specifications are subject to change without notice.

California Prop 65 Warning: This product contains a chemical(s) know to the state of California to cause cancer or birth defects or other reproductive harm.

Additional information

Weight3.0 kg
Dimensions36 × 6 × 6 cm

Reviews

There are no reviews yet.

Be the first to review “R3 Locking Nut – Compound Rosewood Fingerboard – Jumbo Frets – Mighty Mite Strat Neck – 10.5”

Your email address will not be published. Required fields are marked *

Related products

Reverse Headstock-Compound Radius-CBS®/Large Headstock-Rosewood Fingerboard – Righty nut -10.5mm

$163.25

VIEW DETAILS
Read more
R3 Locking Nut – Compound Ebony Fingerboard – Jumbo Frets – Mighty Mite Strat Neck -10.5

$209.30

VIEW DETAILS
Read more
R3 Locking Nut – Compound Maple Fingerboard – Jumbo Frets – Mighty Mite Strat Neck – 10.5

$177.10

VIEW DETAILS
Read more