Placeholder

Maple Fingerboard – Vintage Finish – CBS®/Large Headstock – Mighty Mite Strat Neck – 10.0mm

$189.75

MM2935VT-M

SKU: MM2935VT-M Categories: , , ,

PRODUCT OVERVIEW

Neck & Tuners

CBS Strat® style replacement neck features a maple fingerboard fitted with 22 medium frets, vintage tinted. If installing vintage tuners; you may be required to install 10 mm adapter bushings. Mighty Mite does not supply these bushings.

Wood Variations & Assembly

This Strat® style neck is made in Indonesia with quality tone woods. Due to the nature of wood, no two necks are the same and may differ from what is pictured. Never force the neck into the pocket; it should just drop into the neck pocket or be a little snug. Remember that the finish of the neck and body will make the neck pocket smaller.
More specifications are listed below.

SPECIFICATIONS

WOODS & MATERIALS

Fretboard Material

Vintage Tinted Maple

Skunk Stripe

Merbau stripe

Neck Material

Maple

Finish

Satin, Thin Polyurethane Oil Based

SIZE & SHAPE

Neck Profile Shape

C Shape

Radius

9.5 Straight

Orientation

Right-hand

Heel Size

approximately: 2 11/64″ wide by 3″ high and 3/4″ deep

Scale Length

25 1/2″

Nut Width

42mm installed nut

Nut Material

PPS-Flat Bottom

Headstock

Large

FRETS & MORE

Number of Frets

22

Side Dots

Black

Fret Size

Medium – 2.4mm – Nickel

Truss Rod

Single-adjust at headstock – 4mm wrench not included

Inlays

Black Dots

Tuner Hole Size

10mm 6-in-line Modern Tuners

C SHAPE NECK PROFILE

DETAILS SHIPPING

MM2935VT-M has no Cites issues as of April 2018.

Shipping Package Weight: 3 lbs

Shipping Package Dimensions: 36 in x 6 in x 6 in

LIMITED WARRANTY

CONDITIONS OF USE

Pricing and Specifications are subject to change without notice.

California Prop 65 Warning: This product contains a chemical(s) know to the state of California to cause cancer or birth defects or other reproductive harm.

Description

PRODUCT OVERVIEW

Neck & Tuners

CBS Strat® style replacement neck features a maple fingerboard fitted with 22 medium frets, vintage tinted. If installing vintage tuners; you may be required to install 10 mm adapter bushings. Mighty Mite does not supply these bushings.

Wood Variations & Assembly

This Strat® style neck is made in Indonesia with quality tone woods. Due to the nature of wood, no two necks are the same and may differ from what is pictured. Never force the neck into the pocket; it should just drop into the neck pocket or be a little snug. Remember that the finish of the neck and body will make the neck pocket smaller.
More specifications are listed below.

SPECIFICATIONS

WOODS & MATERIALS

Fretboard Material

Vintage Tinted Maple

Skunk Stripe

Merbau stripe

Neck Material

Maple

Finish

Satin, Thin Polyurethane Oil Based

SIZE & SHAPE

Neck Profile Shape

C Shape

Radius

9.5 Straight

Orientation

Right-hand

Heel Size

approximately: 2 11/64″ wide by 3″ high and 3/4″ deep

Scale Length

25 1/2″

Nut Width

42mm installed nut

Nut Material

PPS-Flat Bottom

Headstock

Large

FRETS & MORE

Number of Frets

22

Side Dots

Black

Fret Size

Medium – 2.4mm – Nickel

Truss Rod

Single-adjust at headstock – 4mm wrench not included

Inlays

Black Dots

Tuner Hole Size

10mm 6-in-line Modern Tuners

C SHAPE NECK PROFILE

DETAILS SHIPPING

MM2935VT-M has no Cites issues as of April 2018.

Shipping Package Weight: 3 lbs

Shipping Package Dimensions: 36 in x 6 in x 6 in

LIMITED WARRANTY

CONDITIONS OF USE

Pricing and Specifications are subject to change without notice.

California Prop 65 Warning: This product contains a chemical(s) know to the state of California to cause cancer or birth defects or other reproductive harm.

Additional information

Weight3.0 kg
Dimensions36 × 6 × 6 cm

Reviews

There are no reviews yet.

Be the first to review “Maple Fingerboard – Vintage Finish – CBS®/Large Headstock – Mighty Mite Strat Neck – 10.0mm”

Your email address will not be published. Required fields are marked *