MM-MB-N-1024x744-e1551719663887MM-MB-N-1024x744-e1551719663887

Motherbucker® 16k – Mighty Mite Pickup

$89.00

SKU: MM-MB-N

SKU: MM-MB-16k Categories: , , ,

PRODUCT OVERVIEW

A re-imagining of a pickup worthy of the Motherbucker® name, the original Motherbuckers® were 3-coil monsters that required a special route and mounting ring to be installed. Today there are two pickup models that bear the Motherbucker® name and are made in the USA; they are the MM-MB-16k and MM-MB-20k.

The Motherbucker® 16k is a hot rodded overwound pickup powered by a fully charged Alnico 5 magnet. Bright leads and aggressive distorted rhythms when used in the bridge, but can also be used in the neck when combined with the ultra-hot Motherbucker® 20k in the bridge.
Like all Mighty Mite® humbuckers, the Motherbucker® 16k comes equipped with 4-conductor wiring for coil splitting and parallel options.
DCR ≈ 16.82k
Potted – Yes
Only available in Black.
Motherbucker® is a registered trademark of Westheimer Corporation.

Dimensions

Click on above picture for dimensions.

Installation

This pickup has universal wiring. We suggest you google:  https://www.seymourduncan.com/resources/pickup/wiring-diagrams

to find the right installation guide that best fits your instrument.

If you are unfamiliar with the tools used to install these pickups; we suggest you contact a Luthier to install them. Should the pickups get damaged during installation due to improper installation; warranty will be voided.
Note: Carefully read the shipping information, conditions of use, warranty, return policy and conditions of sale before purchasing.

SPECIFICATIONS

PARTS

Pickups

Humbucker

Pickups

Alnico V Magnet

DETAILS SHIPPING

Shipping Package Weight: 1 lbs
Shipping Package Dimensions: 7 in x 5 in x 2 in

LIMITED WARRANTY

To validate the limited warranty, the original purchaser must complete a Product Registration Form and send within 10 days following the original date of receiving your neck. The warranty is not transferable.

Warranty is void if there has been any physical modification to the pickup e.g. removing the tape from the pickups, changing the original wire set-up, damaging the bottom plate in any way, or damaged due to power surges. Other restrictions may apply.
Mighty Mite will not accept any pickup with leads cut off.
Pickups sold on any guitar or bass are not eligible for warranty repair.

For more information regarding the limited warranty, return and exchange policies go to www.MightyMite.com Resources/Warranty.

Description

PRODUCT OVERVIEW

A re-imagining of a pickup worthy of the Motherbucker® name, the original Motherbuckers® were 3-coil monsters that required a special route and mounting ring to be installed. Today there are two pickup models that bear the Motherbucker® name and are made in the USA; they are the MM-MB-16k and MM-MB-20k.

The Motherbucker® 16k is a hot rodded overwound pickup powered by a fully charged Alnico 5 magnet. Bright leads and aggressive distorted rhythms when used in the bridge, but can also be used in the neck when combined with the ultra-hot Motherbucker® 20k in the bridge.
Like all Mighty Mite® humbuckers, the Motherbucker® 16k comes equipped with 4-conductor wiring for coil splitting and parallel options.
DCR ≈ 16.82k
Potted – Yes
Only available in Black.
Motherbucker® is a registered trademark of Westheimer Corporation.

Dimensions

Click on above picture for dimensions.

Installation

This pickup has universal wiring. We suggest you google:  https://www.seymourduncan.com/resources/pickup/wiring-diagrams

to find the right installation guide that best fits your instrument.

If you are unfamiliar with the tools used to install these pickups; we suggest you contact a Luthier to install them. Should the pickups get damaged during installation due to improper installation; warranty will be voided.
Note: Carefully read the shipping information, conditions of use, warranty, return policy and conditions of sale before purchasing.

SPECIFICATIONS

PARTS

Pickups

Humbucker

Pickups

Alnico V Magnet

DETAILS SHIPPING

Shipping Package Weight: 1 lbs
Shipping Package Dimensions: 7 in x 5 in x 2 in

LIMITED WARRANTY

To validate the limited warranty, the original purchaser must complete a Product Registration Form and send within 10 days following the original date of receiving your neck. The warranty is not transferable.

Warranty is void if there has been any physical modification to the pickup e.g. removing the tape from the pickups, changing the original wire set-up, damaging the bottom plate in any way, or damaged due to power surges. Other restrictions may apply.
Mighty Mite will not accept any pickup with leads cut off.
Pickups sold on any guitar or bass are not eligible for warranty repair.

For more information regarding the limited warranty, return and exchange policies go to www.MightyMite.com Resources/Warranty.

Additional information

Weight0.5 kg
Dimensions8 × 5 × 3 cm

Reviews

There are no reviews yet.

Be the first to review “Motherbucker® 16k – Mighty Mite Pickup”

Your email address will not be published. Required fields are marked *

Related products

Motherbucker® 16k-Z Mighty Mite Pickup

$125.00

VIEW DETAILS
Read more
Motherbucker® 16k-B Mighty Mite Pickup

$125.00

VIEW DETAILS
Read more
Motherbucker® 23K-Z Mighty Mite Pickup

$125.00

VIEW DETAILS
Read more